Shake the aerosol can vigorously for at least 20 seconds to ensure proper mixing of the contents.
Remove the clip on the adapter before use to allow for smooth application.
Before applying the foam, lightly moisten the surfaces with a water sprayer. This helps enhance adhesion and expansion of the foam.
Hold the can upside down and fill holes and cavities up to one-third full, as the foam will expand significantly upon application.
It's crucial to empty the can within 20 minutes of opening to prevent clogging or wastage.
Shake the can regularly during application to maintain consistency and effectiveness.
If working in layers, repeat moistening the surfaces after each layer to ensure proper adhesion and expansion.
Fresh foam spills or excess can be removed using Soudal Gun & Foam cleaner or acetone.
Once the foam has cured, it can only be removed mechanically or with Soudal PU-Remover. Avoid trying to remove cured foam without proper tools or removers to prevent damage to surfaces.